Testsealabs FLU A/B+COVID-19+RSV+ADENO+MP Antigen Combo Test Cassette (Nasal Swab)(Tai Version)
Product Detail:
1. Test Type:
• Antigen and antibody detection depending on the pathogen: Antigen detection for Flu A/B, COVID-19, RSV, and Adenovirus; antibody detection for Mycoplasma pneumoniae.
• Suitable for initial screening and rapid detection in symptomatic patients.
2. Sample Type: Nasopharyngeal swab.
3. Testing Time: Results typically available within 15-20 minutes.
4. Accuracy: Designed with high specificity and sensitivity for each pathogen, enabling accurate identification and differentiation among the viruses and bacteria, especially when proper sampling technique is followed.
5. Storage Conditions: Recommended storage between 2-30°C, avoiding high temperatures and humidity to maintain optimal performance.
6. Packaging: Each kit generally includes an individual test card, sampling swab, buffer solution, and instructions for use.
Principle:
The Flu A/B + COVID-19 + RSV + Adenovirus + Mycoplasma pneumoniae Combo Test Card operates based on colloidal gold immunochromatography and lateral flow assay techniques, with specific sections on the card designated for each pathogen.
Composition:
Composition |
Amount |
Specification |
IFU |
1 |
/ |
Test cassette |
1 |
/ |
Extraction diluent |
500μL*1 Tube *1 |
/ |
Dropper tip |
1 |
/ |
Swab |
1 |
/ |
Test Procedure:
|
|
5.Carefully remove the swab without touching the tip.Insert the entire tip of the swab 2 to 3 cm into the right nostril.Note the breaking point of the nasal swab.You can feel this with your fingers when inserting the nasal swab or check it in the mimnor. Rub the inside of the nostril in circular movements 5 times for at least 15 seconds,Now take the same nasal swab and insert it into the other nostril.Swab the inside of the nostril in a circular motion 5 times for at least 15 seconds. Please perform the test directly with the sample and do not
|
6.Place the swab in the extraction tube.Rotate the swab for about 10 seconds,Rotate the swab against the extraction tube,pressing the head of the swab against the inside of the tube while squeezing the sides of the tube to release as much liquid as possible from the swab. |
7. Take out the swab from the package without touching the padding. |
8.Mix thoroughly by flicking the bottom of the tube.Place 3 drops of the sample vertically into the sample well of the test cassette.Read the result after 15 minutes. Note:Read the result within 20 minutes.Otherwise,are petition of the test is recommended. |