Testsealabs FLU A/B+COVID-19+RSV Antigen Combo Test Cassette 4 in 1(Nasal Swab)(Tai Version)
Product Detail:
1. Test Type:
• Antigen detection for each virus (Flu A/B, COVID-19, and RSV) to identify specific viral proteins.
• Suitable for initial screening and rapid detection.
2. Sample Type: Nasopharyngeal swab.
3. Testing Time: Results typically available within 15-20 minutes.
4. Accuracy: Due to its design and specific antibodies for each virus, the test generally achieves high sensitivity and specificity, allowing for a reliable differentiation among these viruses.
5. Storage Conditions: The test kit should be stored at 2-30°C, away from high heat or humidity, ensuring optimal shelf life and performance.
6. Packaging: The test kit typically includes a single-use combo test card, sampling swab, buffer solution, and instructions for use.
Principle:
The Flu A/B + COVID-19 + RSV Combo Test Card operates using colloidal gold immunochromatography, which allows for rapid visual detection of specific viral antigens in the sample. The test card features separate reaction zones for each virus (Flu A, Flu B, COVID-19, and RSV).
Composition:
|
Composition |
Amount |
Specification |
|
IFU |
1 |
/ |
|
Test cassette |
4 |
/ |
|
Extraction diluent |
500μL*1 Tube *4 |
/ |
|
Dropper tip |
4 |
/ |
|
Swab |
4 |
/ |
Test Procedure:
|
|
|
 |
 |
|
1. Wash your hands |
2. Check the kit contents before testing,include package insert, test cassette, buffer, swab. |
3.Place the extraction tube in the workstation. | 4.Peel off aluminum foil seal from the top of the extraction tube containing the extraction buffer. |
|
|
|
|
5.Carefully remove the swab without touching the tip.Insert the entire tip of the swab 2 to 3 cm into the right nostril.Note the breaking point of the nasal swab.You can feel this with your fingers when inserting the nasal swab or check it in the mimnor. Rub the inside of the nostril in circular movements 5 times for at least 15 seconds,Now take the same nasal swab and insert it into the other nostril.Swab the inside of the nostril in a circular motion 5 times for at least 15 seconds. Please perform the test directly with the sample and do not
|
6.Place the swab in the extraction tube.Rotate the swab for about 10 seconds,Rotate the swab against the extraction tube,pressing the head of the swab against the inside of the tube while squeezing the sides of the tube to release as much liquid as possible from the swab. |
|
|
|
|
7. Take out the swab from the package without touching the padding. |
8.Mix thoroughly by flicking the bottom of the tube.Place 3 drops of the sample vertically into the sample well of the test cassette.Read the result after 15 minutes. Note:Read the result within 20 minutes.Otherwise,are petition of the test is recommended. |
Results Interpretation:
