Testsealabs COVID-19 Antigen Test Cassette 5 in 1(Self Test Kit)
Product Detail:
1. Test Type: Antigen test, primarily detecting specific proteins of SARS-CoV-2, suitable for early-stage infection screening.
2. Sample Type: Nasopharyngeal swab.
3. Testing Time: Results are typically available within 10-15 minutes.
4. Accuracy: Nasopharyngeal swabs provide a sample close to regions with higher viral concentrations, achieving a generally high accuracy rate of over 90%.
5. Storage Conditions: Store between 2-30°C, avoiding high temperatures and humidity to maintain performance.
6. Packaging: Each kit includes an individual test card, sampling swab, buffer solution, and other necessary components.
Principle:
• Colloidal Gold Immunochromatography: This method works by applying colloidal gold-labeled antibodies to the test card’s reaction area. When the nasopharyngeal swab sample is mixed with the buffer solution, the viral antigen in the sample binds with the gold-labeled antibodies, forming a complex that flows along the test strip membrane. This complex will then create a visible line in the test region if the target antigen is present, allowing the result to be read visually.
Composition:
Composition |
Amount |
Specification |
IFU |
1 |
/ |
Test cassette |
1 |
/ |
Extraction diluent |
500μL*1 Tube *1 |
/ |
Dropper tip |
1 |
/ |
Swab |
1 |
/ |
Test Procedure:
|
|
5.Carefully remove the swab without touching the tip.Insert the entire tip of the swab 2 to 3 cm into the right nostril.Note the breaking point of the nasal swab.You can feel this with your fingers when inserting the nasal swab or check it in the mimnor. Rub the inside of the nostril in circular movements 5 times for at least 15 seconds,Now take the same nasal swab and insert it into the other nostril.Swab the inside of the nostril in a circular motion 5 times for at least 15 seconds. Please perform the test directly with the sample and do not
|
6.Place the swab in the extraction tube.Rotate the swab for about 10 seconds,Rotate the swab against the extraction tube,pressing the head of the swab against the inside of the tube while squeezing the sides of the tube to release as much liquid as possible from the swab. |
7. Take out the swab from the package without touching the padding. |
8.Mix thoroughly by flicking the bottom of the tube.Place 3 drops of the sample vertically into the sample well of the test cassette.Read the result after 15 minutes. Note:Read the result within 20 minutes.Otherwise,are petition of the test is recommended. |